Blending my own glow.

[Socram1578]

This is what I’m thinking I can do 100mg ghkcu, 10mg bpc, 10mg tb4, can I recon the ghk with 2 ml then draw 1 ml to blend with bpc and tb4 which were each recon with 1ml each. Should leave me with a 50/10/10 blend reconstituted with 3ml total. 15 units should give me 2.5/.5/.5 if my math is correct. Will this work? I know would have been easier just getting glow already blended but already had bpc and tb, also got a good deal on the ghk100mg.

 

[woundcarping]

The math maths.

Why not buy the blend? Usually it's cheaper than the components.

 

[Socram1578]

woundcarping said:


The math maths.

Why not buy the blend? Usually it's cheaper than the components.

Click to expand...

Was already running bpc and tb but my girl wants ghk so I want to make it easier on her with a single pin.

 

[Flash-BCR]

Socram1578 said:


This is what I’m thinking I can do 100mg ghkcu, 10mg bpc, 10mg tb4, can I recon the ghk with 2 ml then draw 1 ml to blend with bpc and tb4 which were each recon with 1ml each. Should leave me with a 50/10/10 blend reconstituted with 3ml total. 15 units should give me 2.5/.5/.5 if my math is correct. Will this work? I know would have been easier just getting glow already blended.

Click to expand...

I did that exact thing yesterday…plus some KPV, because…KLOW!…I’m visiting my daughter and didn’t want to have reconstituted KLOW in the suitcase along with the Reta vial…so I did a little recon demo/training for them in case they somehow end up with a kit of peps ‘someday’ I had previously sent them all the reconning equipment needed, 3ml leur lock syringes, 1.5” and .5” needles, dental tray, alcohol spray bottles, filters, lab grade/rated sterile vials, labels, Hospira….

 

[bada bing]

It will work in a pinch. Besides the premade blend being cheaper, another potential downside is making your own from components will have more excipients in the final product. The lyophilized peptides are carried on a powdered excipient carrier in the vial and the blends are lyophilized onto one carrier dose as opposed to 2.5 in your example. Carried too far, the extra dissolved solids can create recon solution problems.

 

[Flash-BCR]

Socram1578 said:


This is what I’m thinking I can do 100mg ghkcu, 10mg bpc, 10mg tb4, can I recon the ghk with 2 ml then draw 1 ml to blend with bpc and tb4 which were each recon with 1ml each. Should leave me with a 50/10/10 blend reconstituted with 3ml total. 15 units should give me 5/.5/.5 if my math is correct. Will this work? I know would have been easier just getting glow already blended but already had bpc and tb, also got a good deal on the ghk100mg.

Click to expand...

….oh, and yeah…I did 2ml into a 100mg ghk vial and drew out 1ml and daisy chained the solution into the 3 other vials…then filtered into a sterile vial…I did add another 1ml of BAC with a clean/new syringe to dilute the concentration a bit…

I just ordered some 50mg ghk kits for this very reason…

 

[Stace_wow]

Just 2ML of bac in 100Mg of GHKCU?

If y'all can do that successfully, I'm scared of you! Anyone who can recon GHK-CU 50MG with less then 6ML of bac, I bow to you.....

I have a couple of 100mg vials and I'm over here tryna figure out how much Bac I need to not die every injection

 

[Flash-BCR]

bada bing said:


It will work in a pinch. Besides the premade blend being cheaper, another potential downside is making your own from components will have more excipients in the final product. The lyophilized peptides are carried on a powdered excipient carrier in the vial and the blends are lyophilized onto one carrier dose as opposed to 2.5 in your example. Carried too far, the extra dissolved solids can create recon solution problems.

Click to expand...

So far this above blend I did worked without a recon problem…I have all the KLOW components, but don’t as a rule blend them…I will blend KPV with other peps, but by and large, I like to control the dosing…I have been tempted by KLOW blends, particularly the KLOWverien type blend which is closer to my protocol than standard KLOW, (and then having to supplement with an added pin or two…)

 

[Flash-BCR]

Stace_wow said:


Just 2ML of bac in 100Mg of GHKCU?

If y'all can do that successfully, I'm scared of you! Anyone who can recon GHK-CU 50MG with less then 6ML of bac, I bow to you.....

I have a couple of 100mg vials and I'm over here tryna figure out how much Bac I need to not die every injection

Click to expand...

I hear you…my GHK-Cu/KPV blend I have at home was reconned with NcCL BAC and diluted down with 5ml total…I am up to 3mg GHK-Cu per…and it is still a bit spicy …

I have some GHK-Basic on order (GHK with no Cu) and will research how to blend that in and what it changes for loss/benefit of effectiveness…

 

[amosmylove]

Stace_wow said:


Just 2ML of bac in 100Mg of GHKCU?

If y'all can do that successfully, I'm scared of you! Anyone who can recon GHK-CU 50MG with less then 6ML of bac, I bow to you.....

I have a couple of 100mg vials and I'm over here tryna figure out how much Bac I need to not die every injection

Click to expand...

I recon my 100mg ghkcu with 2ml for 2.5mg/5units dose. But I also draw 15 units of bpc/tb and usually kpv 10 units into that same syringe, so really it is quite diluted still. Sometimes there's a tiny sting, sometimes not. I wonder why.

 

[bada bing]

I haven't done anything with the individual components or different ratios, but I like the traditional pre-blended Klow. I jumped on a kit of GB "Klowverine" and hopefully it won't take forever to arrive and I'll get to try that.

I haven't had much problems with spicy Klow. I recon standard 50/10/10/10 with 3ml of BAC and use 15iu per day. Leaves a sore spot for a couple days, but no sting, redness or welts.

 

[DropBear]

Flash-BCR said:


….oh, and yeah…I did 2ml into a 100mg ghk vial and drew out 1ml and daisy chained the solution into the 3 other vials…then filtered into a sterile vial…I did add another 1ml of BAC with a clean/new syringe to dilute the concentration a bit…

I just ordered some 50mg ghk kits for this very reason…

Click to expand...

I heard this alters the ph level and somehow nullifys each other or damages the compounds effectively giving you an expensive inactive slurry lol

 

[Flash-BCR]

bada bing said:


I haven't done anything with the individual components or different ratios, but I like the traditional pre-blended Klow. I jumped on a kit of GB "Klowverine" and hopefully it won't take forever to arrive and I'll get to try that.

I haven't had much problems with spicy Klow. I recon standard 50/10/10/10 with 3ml of BAC and use 15iu per day. Leaves a sore spot for a couple days, but no sting, redness or welts.

Click to expand...

I get a sting from my ghk/kpv blend a couple few hours after pin, but it is entirely gone by the next day…it has been steadily getting less and less the last 2-3 weeks

 

[mahomies]

amosmylove said:


I recon my 100mg ghkcu with 2ml for 2.5mg/5units dose. But I also draw 15 units of bpc/tb and usually kpv 10 units into that same syringe, so really it is quite diluted still. Sometimes there's a tiny sting, sometimes not. I wonder why.

Click to expand...

I did 2.5ml for 2mg/5 units. I was trying to stretch it, so was doing 400mcg BPC, TB, and KPV with 2mg GHK. The BPC/TB was pre-blended, but I researched the GLOW and KLOW stacks after I got it and decided on KLOW.

I have a LOT of experience with syringes and injections, so I draw from the blend, then the KPV, then the GHK in a single syringe. 8 units BPC/TB (reconstituted a 10/10 vial with 2ml), 10 units KPV (10mg vial with 2.5ml), and 5 units GHK (again, 100mg vial with 2.5).

I do not recommend it, it is a huge pain. Plus, no matter how meticulous I am, there is a higher contamination risk over time, and there will absolutely be some mixing in the KPV and GHK vials since there is already something in the syringe.

It also dulls the needle (31g 8mm) making it harder to break the skin, sometimes worse than others. Doesn’t help with the sting.

As far as the bite, if I pin my lower abdomen, it hurts for 2 days. If I pin above my belly button and closer to my sides, I feel nothing at all after the needle goes in.

After mixing in the syringe for a few weeks I went and got a full kit of KLOW80. I’m switching as soon as the BPC/TB blend is gone.